A SERVICE OF

logo

Open as PDF
next previous
Send documentation comments to mdsfeedback-doc@cisco.com.
Chapter 2 Installing the Cisco MDS 9216 Switch
Installing the Chassis in the Rack
2-12
Cisco MDS 9216 Switch Hardware Installation Guide
78-16165-01
Figure 2-4 Installing the Cisco MDS 9216 Switch in the Rack
Step 4
From the back of the rack, position the longer slider rails with the ears away from
the chassis and slide them into the C brackets previously installed on the sides of
the chassis (see Figure 2-5).
Step 5 Level the chassis (it may sag slightly towards the back) and attach the slider rails
to the mounting rails with the 12-24 x 3/4-inch or 10-32 x 3/4-inch screws, three
per side.
1 Mounting rail 3 Screws, 12-24 or 10-32
2 L bracket
MDS 9216
94999
1
3
2