A SERVICE OF

logo

Assembly
8 Rev 90038-20080819
Step 8 – Attach wheel
fenders
1. Attach two fenders using M10x30 bolts,
M10 lock washers, flat washers and lock
nuts.
Step 9 – Attach Hydraulic
Hoses
1. Thread the outlet connector (59) to the
top of the gear pump. Use Teflon tape to
ensure tight fit.
2. Place an O ring (61) onto the exposed
threads of the outlet connector. Then
attach hose (13) to outlet connector
3. Attach hose (15) to the port on the oil
tank. Place an O ring on the port and
tighten the hose using Teflon tape.
4. Attach oil hose (60) to the bottom of the
gear pump.