ViewSonic NMP-500 MP3 Player User Manual


 
ViewSonic NMP-500 3 of 38
FEATURES
Replaces the remote PC that would typically run and drive a plasma or LCD for digital
signage
Network ready for easy installation
Ready to handle many layers of high-quality graphics, text, and video with integrated
Internet Explorer browser, Flash player, and HD player integrated
Powerful hardware processor for robust and smooth playback of high-definition and Flash
content
Supports a variety of graphics and video formats including full-color, JPEG, Macromedia
Flash, and HTML
MPEG1, MPEG2, MPEG4, WAV support
Built on open standards to support a wide variety of other vendors' PDPs, LCDs and
projectors and it integrates with a multi-vendor networking environment
Efficient and cost effective solution for digital signage
Devices can be remotely controlled with a user-friendly web interface from virtually
anywhere on a network or the Internet
Can be managed with Tivella Administration Server (TAS) software and Cisco ACNS
software
Display content in landscape or portrait mode
TWO MODES OF COMMUNICATION
There are two modes of communication with the NMP-500: an HTTP web interface and a Telnet
advanced command line interface. This document focuses on the web interface only. Web-based
interface is executed using the HTTP protocol.
To start communicating with the NMP-500, follow the step-by-step instructions in the section
called SETTING UP THE NMP-500 in this guide.