Filter
Top Products
1.2 Format Built-in HDD via USB
If the built-in HDD is not formatted, the PC cannot detect the hard disk drive. If this is the case, format the hard disk first
by referring to the following guide. If the hard disk drive is already formatted, skip to “1.3 Copy Data via USB”.
1.2.1 Windows 98SE, ME
1) Install Windows 98 Driver. Find the driver at
Windows 98 CD→ Windows 98 Driver Directory.
After finishing installation, Connect the AVOX to
your PC via USB cable.
5) Select “5. Change current fixed disk drive” and
press [Enter].
6) Type the last Disk number in 0% usage.
7) Select “1. Create DOS partition or Logical DOS
Drive” and press [Enter].
(If not detected, plug in the power cable)
2) Select [Start→Program→Accessories→MS-
DOS Prompt] on Windows.
3) Type “fdisk” command at Command Prompt
window and press [Enter].
4) Type the “Y” at the “Do you wish to enable large
disk support (Y/N)” and press [Enter].
7