Filter
Top Products
17
Preparation
To disconnect the interface cable from the player, pull out the cable while
simultaneously pressing the “PUSH” mark on the connector.
Caution
• Be sure to use the supplied interface cable when connecting to a computer.
Substitution by other means may result in damage or malfunction.
• The player consumes power of 500mA/5V while connected to a computer. Confirm
that a USB connector of your computer (or USB hub) satisfies this requirement before
connecting the player.
• Make sure that battery is loaded before connecting to a computer. The player cannot
turn on if it is connected to a computer with no battery loaded. When the player is
connected to your computer, it is powered from the USB connector (or USB hub).
• Never remove the interface cable while exchanging data between the player and the
computer. Doing so may damage the data.
• Close the interface door when the I/F connector is not used.
• Do not use the supplied interface cable to connect to any device other than this player.
Notes
• You cannot operate the player when connected to a computer. The player will stop
playback when connected to a computer.
• The display of the player may be darker when connected to a computer. It is not
abnormal.