13
Care and Maintenance
There are no user serviceable parts inside this radio. Please refer all service problems to a qualified service facility.
If the cabinet becomes dusty wipe the exterior with a soft dust cloth only. Never use dusting sprays or polishes on the
cabinet.
If the cabinet becomes dirty or smudged with fingerprints it may be wiped with a soft cloth that has been slightly dampened
with a mild soap and water solution. Always disconnect the power cord from the AC outlet before cleaning and never allow
any liquid to get inside the cabinet.
4. Press and hold the MONTH/DATE button for 3 seconds. The month and date (MM/DD) will appear briefly followed by
a flashing “0”. Use the SimpleSet keypad to enter the correct month and date in the MM/DD format and then press the
ENTER button. The clock will beep twice to confirm the setting. The Day indicator will automatically change to match
the Year, Month, and Date you selected.
5. Press and hold the TIME button for 3 seconds until a flashing “0” appears in the display. Use the SimpleSet keypad to
enter the correct time, press the AM/PM button if necessary, and then press the ENTER button to save the setting.
The clock will ‘beep’ twice to confirm that the setting was accepted and the clock will begin to run.
6. After you have reset the Year, Month/Date, and Time displays, check your alarm time and alarm mode
settings and adjust as required.
Lithium Battery Precautions
• Dispose of exhausted battery properly, in accordance with your local regulations.
• Do not leave the exhausted battery lying around where a young child or pet could play with or swallow it. If the battery is
swallowed, contact a physician immediately.
• Battery may explode if mistreated. Do not attempt to recharge it or disassemble it. Do not dispose of the old battery in a
fire.
P17