Filter
Top Products
11
Projector Operation
IMPORTANT: The projected image will be most visible when the room is dark. The image may not be visible
during daylight hours or in a brightly lit room.
Please note that there is no ‘PM’ indicator in the projector display. If the ‘AM’ indicator does not appear then the
time being projected is ‘PM’.
1. Press the PROJECTOR ON/OFF button to turn the projector ‘On’.
2. Turn the projector housing slowly to aim the projected image on your wall or ceiling.
3. If the image appears to be upside down on your wall or ceiling when you are lying in bed, set the FLIP IMAGE switch
to its alternate position.
4. If the image is fuzzy or out of focus, slowly rotate the FOCUS adjustment ring clockwise or counter-clockwise until you
achieve the sharpest focus.
5. If you do not want to see the projected image, press the PROJECTOR ON/OFF button to switch the projector ‘Off’.
“PROJECTOR” On/Off Button
P15