Filter
Top Products
7
Adjusting The Wake Up Times
Your Redi-Set clock radio has two separate alarms that can be set and used independently. You may use the alarms to wake
two people at different times, or you may use one alarm for weekdays and the other for weekend wake up times.
The initial default setting for Alarm 1 is 6:00 AM. The initial default setting for Alarm 2 is 7:00 AM.
The procedure for adjusting the wake-up times is the same for both Alarm 1 and Alarm 2.
1.
Depress and hold either the ALARM 1 or ALARM 2 Setting Button for 3 seconds. The display
will briefly show the current Alarm 1 or Alarm 2 wake up time and then “0” begins flashing.
2. Enter the desired wake-up time on the SimpleSet keypad, press the AM/PM button to switch
between AM and PM wake-up time if necessary, and then press the ENTER button. The clock
will ‘beep’ twice to confirm that the new alarm time has been accepted and the display will
return to the correct time.
Notes:
• Be sure that you have set the wake-up time correctly for AM or PM by observing the AM/PM indicators on the display.
• If you enter an invalid time on the keypad you will hear a long ‘beep’ and the display will return to the flashing “0”. Re-enter
a valid wake-up time and press the ENTER button again.
Selecting The Alarm Mode
Your Redi-Set clock radio allows you to select from among three different alarm operation modes for either alarm. The alarm modes are:
• Everyday – the alarm will turn on all 7 days.
• Weekdays only – the alarm will only turn on Monday through Friday.
• Weekends only – the alarm will only turn on Saturday and Sunday.
To check the Alarm Mode setting for Alarm 1, depress the ALARM 1 setting button. The display
will show the Alarm 1 wake-up time and the Day indicators will show you the alarm mode that is
selected.
• If all 7 Day indicators are ‘On’, the Everyday alarm mode is selected.
• If only the MON (Monday) through FRI (Friday) indicators are ‘On’, the Weekdays only mode is
selected.
• If only the SAT (Saturday) and SUN (Sunday) indicators are ‘On’, the Weekends only mode is
selected.
To change the Alarm Mode setting for Alarm 1:
1. Hold the ALARM 1 setting button for 3 seconds until “0” begins flashing in the display.
2. Enter a new wake-up time on the SimpleSet keypad, or re-enter the current wake up time and continue pressing the
ALARM MODE (Display) button until the Day indicators show the desired mode, Weekdays only, Weekends only, or
Everyday operation.
3. Press the AM/PM button if necessary and then press the ENTER button to save the new Alarm Mode selection.
Follow the same procedure to select the desired Alarm Mode for Alarm 2 if necessary.
P11