Filter
Top Products
Selecting Recording Destination
1. From the radio sub-menu, use
UP ()and DOWN ()to move
the cursor to Rec Dest (Recording
Destination) (Available only when an
external memory card is inserted)
2. Press SELECT or RIGHT ()to select
between internal (INT) and external
(EXT) memory.
View FM Recording
1. In the main menu, use UP ()and
DOWN ()to move the cursor to
Radio Recs (Radio Recordings).
2. Press SELECT or RIGHT ()to enter
the Radio Recs menu.
The first recording is listed first.
3. Press SELECT or RIGHT () to play
the highlighted item.
Delete FM Recording
1. In the main menu, use UP ()and
DOWN ()to move the cursor to
Radio Recs (Radio Recordings).
2. Press SELECT or RIGHT ()to enter
the Radio Recs menu.
The first recording is listed first.
3. Press MENU when the cursor is at the
radio recording to be deleted.
4. Use UP ()and DOWN ()to move
the cursor to Delete File.
5. Press SELECT to delete.
EN
EN
21
Radio
Suppressing Stereo Signal
If FM stereo reception is weak, select
mono sound to reduce the noise.
1. From the radio submenu, use
UP ()and DOWN ()to move the
cursor to Mode.
2. Press SELECT or RIGHT ()to select
between Stereo and Mono sound.
Record FM Radio
Tune to the Station to be recorded.
•Press REC to start recording.
•Press REC to pause recording.
Press again to resume
•Press OFF/STOP () to stop
recording.
Selecting Recording Duration
1. From the radio sub-menu, use UP
()and DOWN ()to move the
cursor to Rec Dur (Recording
Duration).
2. Press SELECT or RIGHT ()to select
among Max, 60m, 30m and 5m.
FM001.mp3
FM002.mp3
FM003.mp3
Radio
Note
Radio recordings are saved
in mp3 file format. They can
be treated in the same way as other
mp3 music files.
22
Note
Radio recordings can also be
found in FM directory under
folder option.
Go to Music
Go to Voice
Go to Line-in
Clear Preset
Mode Stereo
RecDur Max
Settings ->
Mem Usage ->
Folders ->
Artists ->
Albums ->
Titles ->
Genres ->
MySel ->
Radio Recs ->
Voice Recs ->
Line-in Recs ->
Delete File
Settings ->
Mem Usage ->
Version ->
RecDur Max
RecDest INT
Settings ->