Filter
Top Products
43
English
Tuning in to and Storing
Radio Stations
Automatically (Auto-
Memory Scanning
function)
1 Press RADIO ON•BAND to
turn on the radio.
2 Press RADIO ON•BAND
repeatedly to select AM or FM.
3 Press ENTER until “A”
appears in the display.
The Walkman starts searching
and storing stations.
4 After the preset number
appears, tune in to a station
using PRESET+/–.
Storing Radio Stations
Manually (Manual-
Memory function)
You can preset the stations in any
order.
1 Turn on the radio and select
the desired band.
2 Press ENTER. The frequency
digits and a preset number
flash in the display.
3 While the frequency digits and
the preset number are flashing,
tune in to a station you wish to
store using TUNING+/–, and
select a preset number using
PRESET+/–.
4 While the frequency digits and
the preset number are flashing,
press ENTER.
5 Tune in to a station using
PRESET+/–.
Notes
•If you cannot complete step 3 or 4
while the indications are flashing,
repeat from step 2.
•If you preset a new station to the
same preset number, the previously
stored station will be erased .
To cancel the stored station
Follow the procedure above and in
step 3, instead of tuning in to a
station, press and hold TUNING
+/– until “– – – –” is displayed.
Press ENTER while “– – – –” is
flashing.
Receiving Stations
Outside Japan
1 Press RADIO ON•BAND to
turn on the radio.
2 Press ENTER. The frequency
digits, “PRESET” and a preset
number flash in the display.
3 Press and hold RADIO ON•
BAND for more than 2
seconds. “AREA 1” flashes in
the display.
4 While “AREA 1” is flashing,
press PRESET+/– repeatedly
to select “USA” or “Eur” and
press ENTER.
5 Press RADIO ON•BAND
repeatedly to select AM or FM
and press TUNING+/– to
select a station.