Filter
Top Products
40
To play a tape recorded
with Dolby* NR (PB) system
Press MENU repeatedly in the
playback or stop mode to set the
cursor to a NR (PB) (Dolby noise
reduction) in the display. Then
press SET to show “ON”.
* Dolby noise reduction
manufactured under license from
Dolby Laboratories Licensing
Corporation.
“DOLBY”and the double-D symbol
a are trademarks of Dolby
Laboratories Licensing
Corporation.
Recording
You can record radio programmes
from the built-in radio, or record
with the supplied microphone. In
either case, use a new or fully
charged battery.
1 Insert a normal (TYPE I) tape
with the side you want to
record facing the tape holder.
When you open the cassette
holder, “FWD” will appear in
the display window.
If “REV” is displayed, open and
close the cassette holder so that
“FWD” appears.
find the beginning FF•AMS
of the next track/ once/
succeeding 9 tracks repeatedly
(AMS*) during
playback
find the beginning REW•AMS
of the current track/ once/
previous 8 tracks repeatedly
(AMS) during
playback
play the same side REW•AMS
from the beginning for two
(Rewind Auto seconds or
Play function) more during
stop
play the other side FF•AMS for
from the beginning two seconds or
(Skip Reverse more during
function) stop
* Automatic Music Sensor
Note on AMS
•To operate the AMS, you need a
blank of 4 seconds or longer
between the tracks. Therefore, if
there is noise between the tracks,
this function will not detect the
blank and will not operate.
Likewise, if the recording level is
moderately low within a track, this
function may inaccurately operate.
To select playback mode
(PB)
Press MENU repeatedly in the
playback and stop mode to set the
cursor to MODE (PB) in the
display. Then press SET to select
the desired mode.
To play Select
both sides repeatedly a
both sides once Å
from the side facing
the cassette holder