41
English
2 Select a recording source:
To record from the radio
Tune in to a station you want
to record (see “Listening to the
Radio”). When recording FM
programmes, make sure the
earphones are plugged in as
they serve as an aerial.
To record with the
microphone
Connect the supplied
microphone to the MIC
(PLUG IN POWER) jack. You
can use the supplied
microphone stand as
illustrated.
3 Slide REC.
“REC” appears in the display
and recording starts after
about two seconds.
Recording stops at the end of
the side.
To stop recording
Press p.
To reduce noise while
recording AM programmes
Set the ISS (Interference Suppress
Switch) to the position that reduces
noise the most.
To prevent a tape from
being accidentally recorded
over
Break off the tabs from side A
and/or B. To reuse the tape for
recording, cover the tab hole with
adhesive tape.
Notes
•Do not use a CrO2 (TYPE II) or
metal (TYPE IV) tape, otherwise the
sound may be distorted when you
play back the tape, or the previous
recording may not be erased
completely.
•Do not connect or disconnect the
headphones to 2REMOTE while
recording from the radio. The
recording condition may change
abruptly, or noise may be recorded.
•When recording with the
microphone, do not place it near a
lamp cord or a fluorescent lamp to
avoid noise interference.
•If a howling effect occurs, turn
down the volume.
•While recording, only the p (stop)
operation functions.
•MB/GRV mode does not affect
recording.
•During recording, the LCD menu
function is inoperable.