Filter
Top Products
39
English
zOperating the
Walkman
Playing a Tape
The Auto Tape Selector
automatically selects the tape
(normal (TYPE I), CrO2 (TYPE II),
or metal (TYPE IV)) for playback.
1 Insert a cassette.
2 Press œ to start playing then
adjust the volume.
If the earphones do not fit to
your ears or the sound is
unbalanced, turn round the
earphones a little to fit to your
ears firmly.
When adjusting the volume on
the Walkman
Set the VOL control on the
remote control at maximum.
When adjusting the volume on
the remote control
Set the VOLUME control on the
Walkman to around 6.
To Press
play the other side œ during
playback
stop playback p(stop)
fast forward FF•AMS
during stop
rewind REW•AMS
during stop
Connecting the
Earphones
1 Connect the micro plug firmly
to the remote control.
2 Connect the remote control to
2REMOTE.
You can put the longer
earphone cord behind your
neck.
To use the supplied clip
Position the earphones cord
through the guides on the supplied
clip as shown. Fasten the clip to
your clothes.
Releasing HOLD
The HOLD function locks the
Walkman to prevent from
operating when you accidentally
press a button. If the Walkman is
locked, unlock it before operating.
1 Slide HOLD to the opposite
direction of the arrow.
To lock the Walkman
Slide HOLD to the direction of the
arrow.
To lock and unlock the
remote control
See “Using the remote control”.
(continued)