Filter
Top Products
The Tape Player24
Recording the tracks on CD by specifying the tape length
(continued)
Recording programed tracks (EDIT PGM)
The first half of the programed tracks will be recorded
on one side of the tape, and the second half will be
recorded on the other side. According to the tape you
use, you can set the total recording time.
1 Press p on the CD section until “Cd” appears in
the display.
2 Press EDIT to display “E-PGM”.
Note
Do not open the CD
compartment while
editing; the settings for
recording will be erased.
If you do, start from step
1 again.
EDIT
6 PUSH
OPEN/CLOSE
=, +
(
pr/P DISPLAY ENTER
MEMORY
.