Filter
Top Products
The CD Player18
To cancel Program Play
Press MODE•MONO/ST ISS until “PGM” disappears
from the display.
To check the order of tracks before play
Press PROGRAM•AUTO PRESET•CHECK in stop
mode until “CHECK” appears in the display.
As you press = or +, the track number appears
in the programmed order.
To change the current program
Change before starting the program play.
To Do this
Erase the last track in 1 Press CANCEL. Every time
the program you press the button, the last
track in the program is
cleared.
2 Re-enter the track numbers
using = or + and
DISPLAY ENTER MEMORY.
Change the whole 1 Press p on the CD section to
program completely erase the whole program.
2 Create a new program
following the programming
procedure.
Tips
• If the program play is
finished, the program is
saved. You can play the
same program again by
pressing ^.
• If you open the CD
compartment, the
program is erased.
• You can record your
own program.
1 After you’ve created
the program, insert a
blank tape into the
tape compartment.
2 Press r/P and then
( to start recording.
Press ^ to start
playing the program
play.
Creating your own program (Program Play) (continued)