Filter
Top Products
52
GB
Using an Adding Recording
At a factory setting, you cannot add a recording (page 35) not to erase the
message by accidental operation. If you want to add a recording to a
previously recorded message (page 35) or
add an overwrite recording
(page 36)
, change the REC-OP setting in the procedures below.
1 Turn the jog lever toward MENU.
The menu mode will be displayed in the display
window.
2 Press the jog lever up or down (>/.)
to select “REC-OP”, then press the jog lever
(x•B).
The adding recording window will be displayed.
3 Press the jog lever up or down (>/.)
to select “ON”, then press the jog lever
(x•B).
The setting is changed.
4 Press the jog lever up or down (>/.)
to select “ADD” or “OVER”, then press the
jog lever (x•B).
•ADD: adds a recording to a
previously recorded message
•OVER:
adds an overwrite recording
5 Press the jog lever toward MENU to exit
the menu mode.
The normal display appears.
To prohibit to add a recording
In step 3 , select “OFF” and then press the jog lever (x•B).
Jog lever (>/./x•B/
MENU)