Filter
Top Products
6
Operation Flow Chart
For details, refer to the pages in z.
: Necessary step
: Optional step
Dictating qd
Connect the AC power adaptor to the unit and to a wall outlet.
0
Connect the optional HU-80 hand control unit. q;
Set the POWER switch to ON.
Insert a cassette. qa
Set the TAPE SPEED selector to 2.4 or 4.8. qg
Press the RESET button to set the TAPE COUNTER to zero.
Set the function selector of the HU-80 to DICT. Speak into the
microphone.
For quick reviewing (playback) and correcting the dictated material
Keep the function selector of the HU-80 pressed down toward
B. SPACE to rewind the tape unit the desired point on the tape is
reached. Release the selector and playback of the dictating begins.
When the reviewing is completed, set the function selector to
DICT to proceed with the dictating.
Record the LTR signal at the end of each dictated material. qf
Set the function selector of the HU-80 to STOP.
Press the eject button to remove the cassette.
Hand the cassette to your secretary or transcriptionist.
HU-80
(not
supplied)