Filter
Top Products
10
Connecting the HU-80 Hand Control Unit (not supplied)
For operation, refer to “Dictating” on page 13.
Attaching the cradle
Attach the cradle which is supplied to the HU-80 to the left or right side of the unit. Place the HU-80
hand control unit on the cradle while not in use. Insert the cradle into the slots and slide to secure it.
Connecting the Supplied Foot Control Unit.
For operation, refer to “Transcribing” on page 17.
Preparation
Connecting the Power Source
Rear
Note on the AC power adaptor
Use only the AC power adaptor
(supplied). Do not use any other
AC power adaptor.
to the DC IN 9V jack
AC power adaptor
(supplied)
to a wall outlet
Polarity of the plug
This way
Not this way
to the CONTROL UNIT
connector
HU-80
to the CONTROL UNIT
connector
Left side
Right side
Foot control unit
(supplied)
This way
Not this way