Filter
Top Products
23
Telephone Recording
To record a telephone conversation, connect the telephone recording adaptor (not
supplied)* to the TELEPHONE PICKUP jack. For further details, refer to the instruction
manual of the telephone recording adaptor.
1 Set the POWER switch to ON.
The POWER lamp lights up.
2 Insert a cassette. (See page 11.)
3 Set the TAPE SPEED selector to 2.4 (cm/s) or 4.8 (cm/s). (See page 15.)
4 Keep the TEL REC button pressed for more than a second.
Telephone recording begins. The REC/ERASE lamp flickers when the telephone
recording adaptor picks up the sound.
To stop the tape
Press the s STOP button.
At the beginning of telephone recording
The LTR signal is automatically recorded.
While the LTR signal is being recorded (for about 3 seconds), the unit cannot be stopped even though
the s STOP button is pressed.
During telephone recording
Only the LTR button (HU-80) and the s STOP button (BM-87DST) are operative.
42
13
POWER
REC/ERASE
to the TELEPHONE PICKUP jack
Telephone Recording Adaptor (not supplied)
Rear