Filter
Top Products
2
MZ-N510CK
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED
LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS
AND IN THE PARTS LIST ARE CRITICAL TO SAFE
OPERATION. REPLACE THESE COMPONENTS WITH
SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB-
LISHED BY SONY.
When to replace the battery
When the dry battery is weak, flashing
r or LOW BATT a ppears in the
display. Replace the dry battery.
The battery level indicator is approximate.
It may be more or less than the indication
depending on the operating condition.
Note
Stop the recorder before replacing battery.
Battery life
The battery life may be shorter due to
operating conditions, the temperature of
the location, or alkaline dry battery you
use.
(Unit: approx.hours)(JEITA
1)
)
1)
Measured in accordance with the JEITA
(Japan Electronics and Information
Technology Industries Association) standard.
LR6 (SG)
alkaline dry
battery
2)
2)
When using a Sony LR6 (SG) STAM INA
alkaline dry battery (produced in Japan).
Normal LP2 LP4
Recording
3)
3)
To prevent interrupted recording due to
drained battery, use new battey for recording
operations.
10 14 18.5
Playback 42 48 56
Modulation system
EFM (Eight to Fourteen Modulation)
Frequency response
20 to 20,000 Hz – 3 dB
Inputs
1)
Line in:
stereo mini-jack for analog input
(minimum input level 49 mV)
optical (digital) mini-jack for optical
(digital) input
Outputs
i: stereo mini-jack
Maximum output level
5 mW + 5 mW; load impedance
16 Ω(except USA),24Ω(Οnly USA)
Power requirements
Sony AC Power Adaptor connected at the DC
IN 3V jack:
120 V AC, 60 Hz (Models for USA, Canada
The recorder:
Size-AA (LR6) alkaline battery
Dimensions
Approx. 81.0 × 27.7 × 74.4 mm (w/h/d)
(3
1
/
4
× 1
1
/
8
× 3 in.)
Mass
Approx. 103 g (3.6 oz) the recorder only
1)
The LINE IN (OPTICAL) jack is used to
connect either a digital (optical) cable or a line
(analog) cable.
2)
The i jack connects either headphones/
earphones or a line cable.
3)
Measured in accordance with JEITA.
Car connecting pack
Frequency response: 50 to 20,000Hz (Differs
depending on your car cassette deck)
Dimensions: Approx. 102.4 × 12.1 × 63.8 mm
(w/h/d) (4
1
/
8
×
1
/
2
× 2
5
/
8
in.)
Mass: Approx. 42 g (1.5 oz)
Cord length: Approx. 1.5 m
Car battery cord
Input voltage: DC 12 V/24 V (only for negative
# ground cars)
Rated output voltage: DC 3.0 V
Rated output current: 1,000 mA
Dimensions: Approx. 36.0 × 26.2 × 101.1 mm
(w/h/d) (1
7
/
16
× 1
1
/
16
× 4 in.) including
projecting parts
Mass: Approx. 60 g (2.2 oz)
Cord length: Approx. 1.5 m
and Mexico)
Checking the supplied accessorie
AC power adaptor (1)
Headphones/earphones (1)
Dedicated US cable (1)
Rotary commander (1)
CD-ROM (SonicStage Ver. 1.5 and Net MD
Simple Burner Ver. 1.5)(1)*
Design and specifications are subject to change
without notice.
Car battery cord (1)
Car connecting pack (1)
Carrying case with Velcro strips (1)
∗Do not play a CD-ROM on an audio CD player.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES
SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT.
NE REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES
SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL
OU DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.