Filter
Top Products
Other Operations
61
US
Controlling the VCR with the
remote
1 Press RM SET UP and AV [/1
simultaneously.
The RM SET UP indicator lights up.
2 Press VIDEO1 or VIDEO2.
3 Enter your VCR’s manufacturer code
(see the table) using the number
buttons.
4 Press ENTER.
When the registration is completed, the RM
SET UP indicator flashes twice.
Code numbers of controllable
VCR
Press VIDEO1 or VIDEO2.
If more than one code number is listed, try
entering them one at a time until you find the one
that works with your VCR.
Controlling the VCR
Press the button “VIDEO1,” or “VIDEO2.”
Sources that can be controlled by the remote
change depending on the setting of VIDEO1 or
VIDEO2.
You can control your VCR using the buttons
below.
Notes
• Depending on the VCR, you may not be able to
control your VCR, or use some of the buttons above.
• To operate a DVD player, press DVD, and then
change the mode of the receiver to DVD.
Manufacturer Code number
SONY 701,702,703,704,705,706
AIWA 710,750,757,758
AKAI 707,708,709,759
BLAUPUNKT 740
EMERSON 711,712,713,714,715,716,750
FISHER 717,718,719,720
GENERAL
ELECTRIC
721,722,730
GOLDSTAR 723,753
RM SET UP
Number
buttons
VIDEO2
AV ?/1
VIDEO1
ENTER
GRUNDIG 724
HITACHI 722,725,729,741
ITT/NOKIA 717
JVC 726,727,728,736
MAGNAVOX 730,731,738
MITSUBISHI/MGA 732,733,734,735
NEC 736‘
PANASONIC 729,730,737,738,739,740
PHILIPS 729,730,731
PIONEER 729
RCA/PROSCAN 722,729,730,731,741,747
SAMSUNG 742,743,744,745
SANYO 717,720,746
SHARP 748,749
TELEFUNKEN 751,752
TOSHIBA 747,755,756
ZENITH 754
By pressing You can
AV [/1 Turn the VCR on or off.
Number buttons Select a channel.
ENTER Confirm the selected channel.
AUDIO Change the audio.
CH –/+ Change VCR channels.
m/M Fast Forward or fast Reverse.
H Play.
X Pause.
x Stop.
AV MENU Display the menu.
DVD DISPLAY The display is on or off.
C/X/x/c/ ENTER Select the item in the program
guide or menu.
Manufacturer Code number