Filter
Top Products
Other Operations
59
US
By adjusting the remote signal, you can control
your TV, satellite receiver or VCR with the
supplied remote.
Notes
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote, the
code number may reset itself to the default (SONY)
setting. Reset the appropriate code number.
Tip
You can set the code number for your TV or satellite
receiver separately.
Controlling TVs with the
remote
1 Press RM SET UP and AV [/1
simultaneously.
The RM SET UP indicator lights up.
2 Press TV [/1.
The RM SET UP indicator flashes once.
3 Enter your TV manufacturer code (see
the table) using the number buttons.
4 Press ENTER.
When registration is completed, the RM
SET UP indicator flashes twice.
If registration is incomplete, the RM SET
UP indicator rapidly flashes 4 times.
* Use the number buttons only to enter the code
number of controllable TVs.
Code numbers of controllable
TVs
If more than one code number is listed, try
entering them one at a time until you find the one
that works with your TV.
Controlling the TV
You can control your TV using the buttons
below.
Other Operations
Controlling Other Units
with the Supplied Remote
TV ?/1
RM SET UP
Number*
buttons
TV/VIDEO
TV VOL +/–
TV CH +/–
ENTER
AV ?/1
Manufacturer Code number
SONY 501,502
AIWA 501,502
DAEWOO 504,505,506,507,515,544
FISHER 508
GOLDSTAR 503,511,512,515,534,544
GRUNDIG 517,534
HITACHI 513,514,515,544
ITT/NOKIA 521,522
JVC 516
MAGNAVOX 503,518,544
MITSUBISHI/MGA 503,519,544
NEC 503,520,544
PANASONIC 509,524
PHILIPS 515,518
PIONEER 509,525,526,540
RCA/PROSCAN 510,527,528,529,544
SAMSUNG 503,515,531,532,533,534,544
SANYO 508,545,546,547
SHARP 535
TELEFUNKEN 523,536,537,538
THOMSON 530,537,539
TOSHIBA 535,540,541
ZENITH 542,543
By pressing You can
TV [/1 Turn the TV on or off.
TV/VIDEO Switch the TV’s input source
between the TV and other input
sources.
continued