Filter
Top Products
Playing Discs
23
US
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operation details supplied with your
disc.
1 Turn on your TV.
2 Switch the input selector on the TV to
this receiver.
3 Press POWER on the receiver.
The receiver enters standby mode and the
STANDBY indicator lights up in red.
4 Press Z on the receiver or OPEN/
CLOSE on the remote, and place a disc
with the label side up on the disc tray.
The receiver automatically turns on and the
STANDBY indicator turns off.
5 Press H.
The disc tray closes, and the receiver starts
playback (continuous play). Adjust the
volume on the receiver.
After following Step 5
Depending on the disc, a menu may appear on
the TV screen. You can play the disc
interactively by following the instructions on the
menu. (DVD: page 26), (VIDEO CD: page 26).
To remove the disc
Press Z on the receiver or OPEN/CLOSE on the
remote. “OPEN” appears in the front panel
display. Remove the disc after the disc tray
slides out from the receiver.
To turn on the receiver
Press POWER on the receiver. The receiver
enters standby mode and the STANDBY
indicator lights up in red. Press "/1 on the
remote. The receiver turns on and the
STANDBY indicator turns off. In standby
mode, the receiver also turns on by pressing Z,
FUNCTION –/+ or N on the receiver or by
pressing DVD, OPEN/CLOSE or H on the
remote.
Playing Discs
Playing Discs
VOLUME
PHONES
POWER
STANDBY
SOUND FIELD
TUNER/PRESET FUNCTION
A. F. D.2CH
MODE
DISPLAY
POWER
STANDBY indicator
Z
FUNCTION –/+
Adjust the
volume
N
"/1
H
Disc tray
OPEN/CLOSE
x
Connect
headphones
x
DVD
When you play an 8 cm disc, place
it on the inner circle of the tray
continued