Filter
Top Products
39
Copying an A3 size original without cutting off the
edges (A3 Full Bleed)
Copying in the centre of the paper (Centring)
Reversing white and black in a copy (B/W Reverse)
Adjusting the sharpness of an image (Sharpness)
Checking copies before printing (Proof Copy)
*
Use this feature to make a full-size copy
of an A3 original on A3W paper so that
the edges are not cut off.
The original must be placed on the
document glass.
Use this function to position the copy
image at the centre of the paper.
This is convenient when the image is
reduced or copied onto paper that is
larger than the original.
This function reverses black and white
in a copy to create a negative image.
Use this function to save toner when
copying an original with large black
areas.
Use this function to sharpen or soften a copy image.
An image of this function is shown at the end of this manual.
Regardless of the number of copies
specified, this function initially prints
only the first set. After you have
checked the first set, the remaining sets
are printed.
* Does not appear when the printer expansion kit with hard drive is not installed.
5 sets
1 set 4 sets
Check