Sanyo DC-MX40i MP3 Docking Station User Manual


 
12
AUX IN PLAY
1. Use a cable with RCA jack to connect external audio source (DVD player, Mini Disc player, Cassette
Deck etc.) to the AUX IN jack on the rear of the unit.
2. Press the FUNCTION button repeatedly until the “AUX” appears on the display.
3. Turn your auxiliary source “ON” and operate it as usual. The sound from the auxiliary source will be
heard through the speakers of the unit.
Note: Aux in cable not included.
EQ shows the present sound tone.
When you press the EQ button, the sound tone changes as below:
EQ CONTROL(on the remote control)
TO SET SLEEP FUNCTION(on the remote control)
1. If you want to fall asleep with music, press the SLEEP button.(F24)
2. Press SLEEP button repeatedly to change and select from 90 to 80, 70, 60, 50, 40, 30, 20, 10 minutes. You
may select the TUNER, CD, USB, CARD or IPOD mode in sleep function.
3. After the unit plays for your selected time, it will shut down automatically. While the SLEEP function is
activated, press SLEEP button once and the remained sleep time will be shown. Press SLEEP button
again to select another sleep time.
MUTE SETTING(on the remote control)
LISTEN TO THE MUSIC BY USING HEADPHONE
A stereo headphone jack is provided for private listening. To listen to the unit with headphones
(not included) insert the 3.5mm mini-stereo plug into the PHONES jack on the front panel.
The external speakers are automatically disconnected when headphones are using.
F24
1. When you press the MUTE button once on the remote control, the volume level will flash and the
audio output will be temporarily terminated.(F24)
2. Press the MUTE button again, the volume level and the audio output will return to normal.
F24