Filter
Top Products
Using the Battery 96
Using the Battery
Please refer to the following instructions when running the computer on battery power, without connecting
the AC power. A Lithium-Ion smart battery is supplied with this computer.
Before Starting!
Carefully read and follow the precautions printed on the battery before using the battery.
Precautions
• Use only charges specified in the user's guide.
• Never heat the battery pack, put it near or in a fire or use at a temperature higher than
60°C, as this may cause fire.
• Never cause a short circuit between the battery pack terminals or disassemble the battery
pack.
• Carefully read and follow the precautions printed on the battery and the safety instructions in
the user's guide before using the battery.
• Please refer to the system operation environment of this manual and operate and the store
the battery at room temperature. ( p.126)
Removing and Attaching a Battery
1 Shutdown the system and place the computer upside down on a flat surface.
2 Pull the two battery latches outwards ( ), then remove the battery.
3 To install the battery again, slide the battery into the system. The battery latches move inwards
and fix the battery automatically.
Check if the battery latch has been moved inwards.
Battery latch