Filter
Top Products
Reinstalling Windows XP 112
Standard Installation
The Windows Standard Installation procedures are described below.
For the Standard Installation, a USB keyboard is necessary. You have to connect the USB key-
board before turning the computer on. The descriptions assume that you are using an external
USB ODD and USB keyboard.
1 In the system recovery media start screen, click Standard Installation.
2 The description for the Standard Installation appears.
Click Yes to start the Windows installation. The system restarts and the Windows installation
begins.
If you have set a booting password, enter the booting password when booting the system to
continue the installation.
3 After the system has restarted, the message 'Press any key to boot from DVD' appears. Do
not press any key at this time.
After a moment the partition configuration screen appears.
To leave the partition unchanged, move to the C:Partition 2 using the direction key (
↓ ) and
press <Enter>.
Partition setting is a function that divides the hard disk drive into one or several partitions. Note
that changing the partition deletes all data on the hard disk drive.
4 Select the folder to install the Windows operating system.
To delete the previous version of Windows and install in the current folder, press <L> on the
keyboard.