Filter
Top Products
Using Samsung Network Manager 51
Using Samsung Network Manager
Samsung Network Manager is a program that helps configure the network settings.
Samsung Network Manager provides the following features.
• You can easily configure the network and printer settings.
• You can immediately use the network without defining new network settings again
after moving locations.
By setting the network settings (IP address, printer settings, etc.) for each location, you can im-
mediately access the network without following network setting procedures each time regard-
less of your location.
• You can diagnose the network status.
You can diagnose the network status when the network is not properly connected.
Setting Up a Network
The setup procedures include the procedures to add a printer to the network.
Before Starting!
Before configuring the network settings, click the Auto Scaler button and set the resolution to
800 x 600 or 1024 x 600 pixels.
At the default resolution (800x480), the lower part of the software screen may not be displayed.
1 To use a wireless LAN, make sure it is on.
Press the Menu button and click the Wireless LAN ON item to turn it on. When the wireless
LAN is turned on, the Wireless LAN LED () lights up.
2 Run Samsung Network Manager.
Select Start > All Programs > Samsung > Samsung Network Manager > Samsung
Network Manager or double click the Samsung Network Manager( ) icon on the
Desktop.
3 Click the Add button. You may need to rotate the screen to access the Add button.
4 Select a network location icon and enter the name of the location (e.g. Home). Click the Next
button.