Filter
Top Products
Getting Started
English - 9
Icon Term Definition
This involves a function available
DVD
in DVD or DVD-R/DVD-RW(V)/+R
discs that have been recorded
and finalized.
This involves a function available
RAM
in DVD-RAM.
This involves a function available
-RW
in DVD-RW.
This involves a function available
-R
in DVD-R.
This involves a function available
+RW
in DVD+RW.
This involves a function available
+R
in DVD+R.
CD
This involves a function available
in a data CD (CD-R or CD-RW).
This involves a JPEG function
JPEG available in CD-R/-RW or
DVD±R/±RW/-RAM discs.
This involves an MP3 function
MP3 available in CD-R/-RW or
DVD±R/±RW/-RAM discs.
MPEG4
This involves an MPEG4 function
available
in DVD±R/±RW/
-RAM discs.
This involves a case where a
Caution function does not operate or
settings may be cancelled.
This involves tips or instructions
NOTE on the page that help each
function operate.
One-Touch
A function that can be operated
button
by using only one button.
ANYKEY A function that can be operated
button by using ANYKEY button.
Before Reading the
User’s Manual
About the use of this user’s manual
1) Be sure to be familiar with Safety Instructions before
using this product. (See pages 2~5)
2) If a problem occurs, check the Troubleshooting.
(See pages 95~97)
Make sure to check the following terms before reading
the user’s manual.
Icons that will be used in manual
©2006 Samsung Electronics Co.
All rights reserved; No part or whole of this user’s
manual may be reproduced or copied without the prior
written permission of Samsung Electronics Co.
Copyright
How to use the DVD
Recorder & VCR
Step 1
Select the disc type
This unit can record on the following types of discs.
If you want to repeatedly record on the same disc or
you want to edit the disc after recording, select a
rewritable DVD±RW or DVD-RAM type disc. If you
want to save a recording without any changes,
choose a non-rewritable DVD±R.
Step 2
Format the disc to start recording
Unlike a VCR, the recorder automatically starts format-
ting when an unused disc is inserted. This is required
for the preparation of recording on a disc.
Using a DVD-RAM
This type of disc can be formatted in DVD-Video
Recording format (VR mode). You can edit recorded
images and create a playlist in a specific sequence
according to your requirements.
Using a DVD±RW/+R
•
When an unused DVD±RW/+R disc is first inserted,
the message "Uninitialized Disc. Do you want to ini-
tialize this disc?" will be displayed.
If you select Yes, initializing will be start. DVD-RW
discs can be formatted in either DVD-Video format
(Video mode) or DVD-Video Recording format (VR
mode)
•
With DVD+RW discs, there is no difference between
DVD-Video format (Video mode) and DVD-Video
Recording format (VR mode).
Using a DVD-R
Initializing disc is unnecessary and only V mode
Recording is supported.You can play this type of disc
on various DVD components only when they have
been finalized.
■
You can only use either the VR or Video mode
on a DVD-RW, but not both at the same time.
■
You can format a DVD-RW to V or VR mode
using disc manager.
It should be noted that the disc's data will be
lost when changing formats.
Note
00995E-VR335_XAA-Eng1 2006.4.3 10:16 PM Page 9