Samsung DVD-VR335 MP3 Player User Manual


 
English - 29
Connections
After all connections are complete, plug the power cord
in the wall outlet.
“Auto” appears in the front panel display. This
means that the current time is being set automati-
cally through the antenna under connection(Auto
Program). The setup may take several minutes.
When the DVD Recorder & VCR operates normally, the
current time is automatically set and displayed in the
front panel display.
Step 6 : Connecting
the Power Cord
Install Batteries in the Remote Control
Open the battery cover on the back of the
remote control.
Insert two AAA batteries. Make sure that the polarities
(+ and -) are aligned correctly.
Replace the battery cover.
If the remote control does not operate
properly:
• Check the polarity + - of the batteries (Dry-Cell)
• Check if the batteries are drained.
• Check if the remote sensor is blocked by obstacles.
• Check if there is any fluorescent lighting nearby.
Dispose of batteries according to local
environmental regulations. Do not put them in
the household trash.
Step 7 : Preparing the
Remote Control
00995E-VR335_XAA-Eng1 2006.4.3 8:23 PM Page 29