Filter
Top Products
24 - English
Step 4 : Connecting HDMI/DVI to a TV
Connecting to a TV with HDMI Jack
Using an HDMI- HDMI cable(not included) connect the HDMI OUT jack on the rear of the DVD Recorder to the HDMI
IN jack of your TV.
Press the input selector on your TV remote control until the HDMI signal from the DVD Recorder appears on your TV
screen.
■
To audio on your TV when using HDMI, set the digi-
tal audio output to PCM (2 channel).(See page 37)
■
Depending on the HDMI device(TV/HDMI Receiver)
you use, audio may not be supported. If TV does
not support Dolby digital/DTS, Audio output is not
available when you set Digital output as Bitstream
or select DTS On in Audio setup menu. In this case,
set the digital audio output to PCM or DTS Off.
Caution
Connections
00995E-VR335_XAA-Eng1 2006.4.3 10:15 PM Page 24