Filter
Top Products
English - 39
Setting Up the Parental
Control
The Parental Control function works in conjunction with
DVDs that have been assigned a rating - which helps
you control the types of DVDs that your family watches.
There are up to 8 rating levels on a disc.
1
With the unit in Stop mode/No Disc mode, press
the MENU button on the remote control.
2
Press the …† buttons to select Setup, then press
the ENTER or √ button.
3
Press the …† buttons to select Parental Control,
then press the ENTER or √ button.
4
Create a 4-digit password using the 0 to 9 buttons
on the remote control.
Parental Control
DVD-Recorder
No Disc
Timer Rec.
Setup
Create the password
Parental Control
DVD-Recorder
No Disc
Timer Rec.
Setup
Confirm the password
Setup
DVD-Recorder
No Disc
Timer Rec.
Setup
System
√√
Clock Set
√√
Channel Set
√√
Language
√√
Audio
√√
Video
√√
Parental Control
√√
RETURNENTERMOVE EXIT
RETURNENTERNUMBER EXIT
RETURNENTERNUMBER EXIT
HDMI/DVI Resolution
This setting is used when the unit is connected by
HDMI or DVI to Display devices (TV, Monitor, etc).
• 480p : 720 x 480
• 720p : 1280 x 720
• 1080i : 1920 x 1080
Connect the DVD-R335 to your TV via HDMI or DVI.
Set your TV's input to HDMI or DVI.
• Press the P.SCAN button while the unit is in stop
mode to select the output resolution.
- If your TV is connected the HDMI or DVI cable, the
output resolution mode changes in the following
sequence each time you press the P.SCAN button:
➞
480p
➞
720p
➞
1080i
- If your TV is connected via AV or component
cables(without HDMI/DVI cable), the output resolu-
tion mode toggles between 480p/480i.
Please use the Registration code to register your DVD
Recorder with the DivX(R) Video On Demand format.
To learn more, visit www.divx.com/vod
Video
DVD-Recorder
No Disc
Timer Rec.
Setup
RETURNENTERMOVE EXIT
TV Aspect
: 16:9 Wide
√√
Input Level : Darker
√√
Black Level : 7.5 IRE
√√
3D Noise Reduction
: Off
√√
HDMI/DVI Resolution
: 480P
√√
DivX(R) Registration
√√
480P
720P
1080i
DivX(R) Registration
System Setup
Output selection
■
Even if HDMI/DVI cable is connected to
your TV, the AV connection outputs only
480i and the Component connection out-
puts only 480p irrespective of the on-screen
display.
Note
00995E-VR335_XAA-Eng1 2006.4.3 8:23 PM Page 39