Filter
Top Products
Manual Clock Set
18
If Auto Setup was unable to find a local TV station to set the DVD-
VCR’s internal clock, follow these instructions to set the date/time
manually.
NOTE: It is important to set the clock for accurate Timer
Recording.
1 Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
2 Select “VCR Setup”
Using the up and down buttons, move the selection cursor to
“VCR Setup,” then press ENTER to select.
3 Select “Clock”
Using the up and down buttons, move the selection cursor to
“Clock Set/Adjust,” then press ENTER to select.
4 Select “MANUAL”
Move the selection arrow to “MANUAL”, then press ENTER to turn
this feature “On.”
• The “Set Clock Menu” will change as shown.
5 Set the Clock
Press LEFT/RIGHT to select each of the following options, then
press UP/DOWN to set each option:
• Set Hour – Set the hour using the up and down buttons.
• Set Minute – Set the minute using the up and down buttons.
• Set Month – Set the month using the up and down buttons.
• Set Day – Set the day using the up and down buttons.
• Set Year – Set the year using the up and down buttons.
6 Confirm Settings
Press the RETURN button to save your clock settings and return to
the Setup menu.
• Press Return again to exit.
1 , 3
CLOCK SET/ADJUST
TIME DATE YEAR
1 2 : 0 0
A
M
1/01 2002 TUE
RETURN
CLOCK SET/ADJUST
A u t o
M a n u a l
RETURN ENTER