Filter
Top Products
18 - English
Connecting & Setting up
■
If you are using an off-air antenna that
has 300-ohm twin flat leads, use an
external antenna connector (300-75 ohm
adaptor : not supplied) to connect the
antenna to the TWIN TRAY DVD
RECORDER.
■
If you have two separate antennas (one
VHF and the other UHF), use a UHF/VHF
combiner-adaptor (available at most
electronics shops) to connect the antenna
to the TWIN TRAY DVD RECORDER.
■
The ANT OUT RF OUT jack of this
product sends only signals received
through the antenna. It does not output
Audio/Video signals. You must connect
Audio/Video cables to view Video from
the unit. (i.e. DVD playback)
NOTE
Step 1: Connecting the
Antenna Cable
There are several ways to connect your TWIN TRAY DVD
RECORDER. Select the antenna that best suits you below.
•
Method 1 : Antenna + TWIN TRAY DVD RECORDER + TV : No
Cable box
•
Method 2 : Antenna +Cable box + TWIN TRAY DVD
RECORDER + TV : Cable box with many scrambled channels
•
Method 3 : Antenna + TWIN TRAY DVD RECORDER + Cable
box +TV : Cable box with a few scrambled channels
Method 1 : Antenna + TWIN TRAY
DVD RECORDER + TV : No Cable
box
You can record non-scrambled channels by selecting
the channel on the TWIN TRAY DVD RECORDER.
Also use this Method if you watch channels without a
cable box.
To ANT IN
TO ANT INPUT
TV
To ANT OUT
RF Cable
00627D-DVD-TR520_XAA_17-24 2005.7.26 10:1 AM Page 18