Samsung DVD-L70A Portable DVD Player User Manual


 
12
ENGLISH
Playing a Disc
I
Before Play
After plugging in the player, the first time you press the POWER button, this screen comes up:
Press the UP/DOWN buttons to select the language, and then press the ENTER button.
(This screen will only appear when you plug in the player for the first time.)
If the language for the startup screen is not set, the settings may change whenever you turn
the power on or off. Therefore, make sure that you select the language you want to use.
I
Play
1. Move the OPEN switch to open the disc cover.
• The disc cover opens up to around a 60-degree angle.
Do not attempt to open the cover to an angle beyond this range. The cover may become damaged.
2. Place a disc gently into the tray.
• You should hear and feel the disc snap firmly into place
• Place a disc into the tray with the disc’s label facing up.
3. Close the disc cover and then press the part marked “PUSH” until it clicks shut.
4. Stopping Play
• Press the STOP ( ) button during play.
5. Pausing Play
Press the PAUSE ( ) button on the remote during play.
- Screen stops, no sound.
- To resume, press PLAY ( ) button once again.
6. Slow Motion Play (DVD only)
Press and hold the button to choose the play speed between 1/8, 1/4 and 1/2 of normal during PAUSE mode.
- No sound is heard during slow mode.
- Press PLAY ( ) to resume normal play.
NOTE:
Reverse slow motion play will not work.
When you stop disc play, the player remembers where you stopped, so when you press PLAY ( ) again, it will pick up
where you left off.
(unless the disc is removed or the player is unplugged, or if you pressed the STOP ( ) button twice.)
Important!
• Make sure that the disc is correctly placed. Otherwise, the disc and/or the DVD player may be damaged.
• If the disc is placed upside down in the disc tray or the region number of the DVD is not supported, No Disc will appear on
the screen.
NO
TE:
• If the player is left in the stop mode for more than one minute without any user interaction, a screen saver will be activated.
Press the PLAY ( ) button to resume normal play.
• This icon indicates an invalid button press.
• Do not remove the disc until it has completely stopped.
L70A/75A-Eng-XEF 7/26/05 8:48 PM Page 12