Filter
Top Products
29
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Switch on your radio.
2. Press and hold in the Info button until "MANUAL" appears on the
display.
3. Press the
Tuning Up or Down button until "FACTORY" appears on
the display, press the Select button the display shows "RESET" and
then press the Select button again.
5. A full reset will be performed, the station list and presets will be erased.
The display will show "ROBERTS" and after a few seconds a station
scan search will be performed automatically. The display will show
progress of the station search e.g. ">>>> 18. The number on the right
of the display is the number of stations that have been found.
In case of malfunction due to electrostatic discharge, reset the product
(reconnection of power source may be required) to resume normal
operation.
If a problem persists our technical staff would be pleased to offer any
assistance on operating the radio. Our technical helpline number is
020 8758 0338.
2
TUNING
SNOOZE
down
up
3
3
3