Filter
Top Products
16
Clock display
1. When your clock radio is in standby mode, the display normally shows
the current time. The date can be displayed by pressing the Info button.
After 10 seconds the display will return to showing the current time.
1
Display Dimmer
Your clock radio has an adjustable dimmer control located underneath the
unit. The display brightness will be increased whenever a button is pressed
for about 10 seconds and it will then revert to a lower level.
1. To increase the display brightness rotate the dimmer control
clockwise.
2. To decrease the display brightness rotate the dimmer control
anti-clockwise.
DC6v800mA
Display Backlight
1. In order to view the display when the display backlight is set to a low
level, you can press any button (apart from the On / Standby button)
to switch on the backlight without switching on the radio. The display
brightness will increase for 10 seconds before returning to the previous
level.