Filter
Top Products
5
R CAUTION:
• When removing misfed paper, do not touch the fusing unit because it could
be very hot.
• To prevent an injury, this printer should be lifted by at least two people.
• When moving the machine, each person should hold the handles that are
located on opposite sides, and then lift it slowly. Lifting it carelessly or drop-
ping it may cause an injury.
• Before installing options, the machine should be turned off and unplugged
for at least half an hour. Components inside the machine become very hot,
and can cause a burn if touched.
• When moving the Paper Feed Unit, hold the handles that are located on the
top of the unit, and then lift it slowly. Lifting it carelessly or dropping it may
cause an injury.
• Do not touch the inside of the controller board compartment. It may cause a
machine malfunction or a burn.
• Keep the machine away from humidity and dust. A fire or an electric shock
might occur.
• Place the machine on a strong and level surface. Otherwise, the machine
might fall and result in an injury.
• If you use the machine in a confined space, confirm that there is a continu-
ous flow of air.
• When pulling the paper tray out, be careful not to pull it strongly. If you do,
the tray might fall and cause an injury.
• This product uses low frequency electromagnetic fields and may cause
harmful interference to sensitive medical implant devices. If you have a car-
diac pacemaker or implantable defibrillator, please consult your doctor for
additional suggestion or advice.
AresPGBMaintGuide-F_FM.book Page 5 Friday, July 26, 2002 5:17 PM