Filter
Top Products
Removing Misfed Paper
69
5
Removing Misfed Paper
When a paper misfeed occurs, an er-
ror message appears on the panel dis-
play. Remove the misfed paper from
the location indicated.
Important
❒ Toner dust may be on the misfed
paper after removal. Be careful not
to get it on your hands or clothes.
❒ Toner dust may be on the paper
printed after removing misfed pa-
per. Make a few prints until smears
do not appear any more.
❒ Forcefully removing misfed paper
may cause paper to tear and leave
scraps of paper in the printer. This
might cause a misfeed and damage
the printer.
When "Remove Misfeed
A:Internal Path" Appears
R
CAUTION:
A
AA
A
Open the front cover by pushing
the front cover release button.
Note
❒ Close the Bypass Tray if it is ex-
tended. If the Bypass Tray is ex-
tended, the front cover does not
open.
B
BB
B
If you see the misfed paper, slow-
ly pull it out.
If you cannot remove paper easily,
do not forcefully pull it, but go to
next step.
C
CC
C
Pull part "A" in the direction of
the arrow, and then open the cov-
er.
• The inside of the machine be-
comes very hot. Do not touch the
parts with a "v" label (means
hot surface). Touching a part
with a "v" label (means hot sur-
face) could result in a burn.
ZHBP281E
ZHBH120E
ZHBH070E
A
AresPGBMaintGuide-F_FM.book Page 69 Friday, July 26, 2002 5:17 PM