Ricoh CL3000 MP3 Player User Manual


 
Printer Does Not Print
63
5
Possible Cause Solutions
Is the Data In indicator
blinking or lit after starting
the print job?
If not blinking or lit, the data is not being sent to the printer.
If the printer is connected to the computer using the in-
terface cable
Make sure the following printer port settings are correct:
For a parallel port connection, port LPT1 or LPT2 should be
set.
For a USB port connection, port USB00 (n)
*1
should be set.
For a IEEE 1394 (SCSI print) port connection, port
1394_00(n)
*1
should be set.
*1
(n) is the number of printers connected.
Windows 95/98/Me
A Click [Start], point to [Settings] and then click [Printers].
B Click to select the icon of the printer. Next, on the [File]
menu, click [Properties].
C Click the [Details] tab.
D
Check the [Print to the following port] box to confirm that
the correct port is selected.
Windows 2000
A Click [Start], point to [Settings] and then click [Printers].
B Click to select the icon of the printer. Next, on the [File]
menu, click [Properties].
C Click the [Port] tab.
D Check the [Print to the following port] box to confirm that
the correct port is selected.
Windows XP
A
Access the [Printers and Faxes] window from [Start] on
the taskbar.
B
Click to select the icon of the printer. Next, on the [File]
menu, click [Properties].
C Click the [Port] tab.
D
Check the [Print to the following port(s).] box to confirm
that the correct port is selected.
Windows NT 4.0
A Click [Start], point to [Settings] and then click [Printers].
B Click to select the icon of the printer. Next, on the [File]
menu, click [Properties].
C Click the [Port] tab.
D Check the [Print to the following port] box to confirm that
the correct port is selected.
AresPGBMaintGuide-F_FM.book Page 63 Friday, July 26, 2002 5:17 PM