Filter
Top Products
3-7
Operations
FUNC indicator
Displayed when the FUNC key is pressed. Disappears when another
key is pressed, or after no other key is pressed for a period of time.
!
WX indicator
Displayed while in Weather Channel mode. For the RAY230E, this
indicator only appears in the US frequency mode, if this feature has
been activated.
"
TX indicator
Displayed while transmitting.
#
CAN indicator (RAY230 only)
Displayed when the Canadian frequency group is selected.
$
US indicator
Displayed when the US frequency group is selected.
%
DESENS indicator
Displayed during the desensitized receiving (local) mode.
&
INT indicator
Displayed when the International frequency group is selected.
'
1W indicator
Displayed when the transmission power of 1W is selected with the 9/
1/25 key or when a low power channel is selected.
MULTI indicator (RAY230E only)
Displayed while the channel stored in Multi-Call memory is displayed.
MEM indicator
Displayed while the channel stored in memory is displayed. This
indicator flashes before the start of the memory scan operation.
SCAN indicator
Displayed during Scan mode. If channels have been stored in memory,
this indicator will be flashing before the start of Scan mode.
!
ATIS indicator (RAY230E only)
Displayed when the ATIS (automatic identification transmission)
feature is turned on (via Menu mode).
"
DSC indicator
Displayed when in a Digital Selective Calling (DSC) call mode, DSC
log, or the DSC menu.