Filter
Top Products
30
Selecting a sound effect
To adjust the bass, treble, and 3D effect for improving the
audio quality, do the following:
1. Using the arrow buttons,
select Sound Effect and press
OK to confirm.
2. The screen shows Bass,
Treble and 3D effect. Adjust
these parameters as
described under
Sound effect
on page 21.
Configuring the power settings
To set the power settings in order to conserve power, do the
following:
1. Using the arrow buttons,
select Power and press OK to
display the options.
2. Use the up and down arrow
buttons to select an option
from the following. Use the
left or right arrow buttons to
change the options:
Contrast: adjusts the
contrast of the LCD screen.
Brightness: adjusts the brightness of the LCD
screen.
Power Saving: specifies the power saving scheme.
Choose from Battery and DC.
Screen Saving Mode: specifies the time after which
the LCD screen is turned off to conserve power.
20:45
Sound Effect
BASS
TREBLE
3D:
Select Confirm
(L) (H)
(L) (H)
(L) (H)
OK
SETTING
20:51
Power
Contrast
Brightness
Power Saving Battery DC
OK
SETTING
Adjust
Select
Screen Saving Mode
20 seconds
Confirm