Filter
Top Products
Other connections
12
70
En
Recording mode
The Recording mode allows you to make
analog recordings from the
LINE 1 (OUT)
jacks.
When Recording mode is on, most sound-
related functions (including
SURROUND
,
ADVANCED
,
AUTO
,
SYSTEM SETUP
)
become inactive. The display will briefly blink
RecMode On
if you try and use a prohibited
function while Recording mode is on.
When Recording mode is off, the audio from
the analog output may be interrupted,
depending on the operation.
1 Press SOUND.
2 Use the
/
(cursor left/right)
buttons to select ‘Rec Mode?’.
3 Press ENTER.
4 Use the
/
(cursor up/down)
buttons to select ‘R.Mode On’ or ‘R.Mode
Off’.
Connecting using the S-video
output
Not applicable to the European model
If your TV has an S-video input, you can use
this instead of the standard video output for a
better quality picture.
• Use an S-video cable (not supplied) to
connect the S-VIDEO OUT to an S-video
input on your TV.
Line up the small triangle above the jack with
the same mark on the plug before plugging
in.
• The S-video ouptut is switchable between
S1 and S2 formats for compatibility with
all TVs. See
S-Video Out
on page 62 for
more on this.
Connecting using the
component video output
Not applicable to the European model
If your TV has component video inputs, you
can use these instead of the standard video
output to connect this system to your TV. This
should give you the best quality picture from
the three types of video output available.
OPTICAL IN
VIDEO
OUT
S-VIDEO
OUT
LINE 2
AUDIO
VIDEO COMPONENT VIDEO OUT
ANTENNA
FM
UNBAL 75Ω
AM
LOOP ANTENNA
PRPBY
TV
XV–DV313
S-VIDEO
INPUT
HTS.book 70 ページ ２００３年２月２５日 火曜日 午後１時４５分