Pioneer DVR-633H-S MP3 Player User Manual


 
Playback
07
65
En
Switching audio channels
For HDD
1
or VR mode content that has both a main and
a SAP (Secondary Audio Program) audio channel, you
can switch between main (
L
), SAP (
R
), or both (
L+R
).
2
When playing Video CDs and audio CDs you can switch
between stereo, just the left channel or just the right
channel.
1 To display/switch the audio channel, press
AUDIO repeatedly.
The audio channel(s) currently playing are indicated on-
screen.
L+R
– Both channels (default)
L
– Left/main channel only
R
– Right/SAP channel only
Stereo
– Stereo (default)
1/L
– Left channel only
2/R
– Right channel only
Switching camera angles
Some DVD-Video discs feature scenes shot from two or
more angles—check the disc box for details: it should be
marked with a icon if it contains multi-angle scenes.
When a multi-angle scene is playing, the same icon
appears on screen to let you know that other angles are
available (this can be switched off if you prefer—see
Angle Indicator
on page 96).
To switch the camera angle, press ANGLE.
The angle number is displayed on-screen.
If the disc was paused, playback starts again with the
new angle.
Repeat play is canceled if you change the angle while
repeat playback is active.
You can also change the angle from some DVD-Video
disc menus. Press
TOP MENU
or
MENU
to access.
Note
1.Only when HDD Video Mode is set to Off. See also
HDD Recording Format
on page 95.
2.When playing a Dual Mono recording on a VR mode disc, if you are listening to the Dolby Digital soundtrack via the digital output, you cannot
switch the audio channel. Set
Dolby Digital Out
to
Dolby Digital
PCM
(see
Dolby Digital Out
on page 93) or listen via the analog outputs
if you need to switch the audio channel.
VR mode HDD CD Video CD
WMA/MP3
AUDIO
VR mode HDD
CD Video CD
WMA/MP3
DVD-Video
TOP MENU
MENU
AUDIO
ANGLE
DVR-530H_KU.book 65 ページ 2005年6月8日 水曜日 午前11時16分