Filter
Top Products
Getting started
04
25
En
Chapter 4
Getting started
Switching on and setting up
When you switch the recorder on for the first time, you
can make several basic settings using the Setup
Navigator feature. This takes you through setting the
clock, the internal TV tuner and the video output settings.
If you’re using the recorder for the first time, we strongly
recommend you use the Setup Navigator before starting
to use the recorder.
1 Switch on your TV and set the video input to this
recorder.
2 Press the
STANDBY/ON button on the remote
control or the front panel to switch on.
When you switch on for the first time, your TV should
display the Setup Navigator screen. (If the Setup
Navigator doesn’t appear, you can also access it from the
Initial Setup menu; see page 92).
3 Use the
/
buttons to select an OSD language,
then press ENTER.
This will also set the audio, subtitle and DVD menu
language preferences.
4 With ‘Start’ highlighted press ENTER to start
using the Setup Navigator.
• Highlight
Cancel
if you want to exit here.
5 Use the
/
buttons to select ‘Antenna’ or
‘Cable’ depending on how you receive your
terrestrial TV channels, then press ENTER.
You can also select
Do not set
if you don’t need the
recorder to retune all the channels (if you’re using the
Setup Navigator for a second time, for example).
After selecting
Antenna
or
Cable
the recorder starts
automatic tuning. This takes a couple of minutes to
complete.
If EPG data is downloaded, the clock will automatically be
set and you can skip to step
7
below.
1
6 Select ‘Auto’ for automatic time setting, then
press ENTER.
STANDBY/ON
ENTER
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
Clock Setting
Help
Setup Navigator
Setup Navigator
Language
English
français
Basic
English
Note
1.If you want to adjust the clock after EPG data is downloaded, you must reset the unit to its default settings. You can then set the clock manually
from the Initial Setup menu.
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
Clock Setting
Help
Setup Navigator
Setup Navigator
Basic
English
Cancel
Start
Complete this setup before you
start using your recorder.
Please use the Initial Setup if you
want to make more detailed settings.
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
Clock Setting
Help
Setup Navigator
Setup Navigator
Auto Channel Setting
English
Cable
Do not Set
Basic
Antenna
Tuning
7/68
Cancel
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
Clock Setting
Help
Setup Navigator
Setup Navigator
Clock Setting
Auto
Manual
Basic
Auto
DVR-530H_KU.book 25 ページ ２００５年６月８日 水曜日 午前１１時１６分