Pioneer AVIC-X9310BT Portable Radio User Manual


 
p This function is available for AVIC-Z130BT
only.
To Ensure Safe Driving
CAUTION
For your safety, avoid viewing the screen in the
voice operation as much as possible while
driving.
If you use voice operation, select US English
or US English (Samantha):TTSin Voice
Languageof Regional Settings. If you se-
lect other languages, voice operation will not
be available.
Basics of the voice operation
Your Pioneer navigation system uses the latest
in voice recognition technology. You can use
voice commands to operate many of its func-
tions. This chapter describes where you can
use voice commands, and also what com-
mands the system accepts.
You can use voice commands to operate the
following functions:
! Searching for a location by address
! Setting the route to the selected POI
! Hands-free phoning
! Switching the AV source
! Operating the iPod
p This function is not available while catalo-
ging of iPod is in progress.
Flow of the voice operation
You can start the voice operation any time
even when the map screen is displayed or AV
is operating. (Some operations are not avail-
able.) The basic steps of the voice operations
are as follows.
1 Switch the screen to map screen or AV op-
eration screen.
j
2 Press the button to activate voice oper-
ations.
j
3 Speak a command into the microphone
after the beep.
When the command is recognized, the na-
vigation system displays next options on
the screen, and pronounces it in some
cases.
j
4 Repeat previous step as necessary.
j
5 The requested operation will be carried out.
p The voice operation may not be operable for a
minute after the navigation system has booted
up.
p The voice operation will be activated 30 sec-
onds after the map screenis displayed.
If the
button does not respond, display
the disclaimer screen and then touch [OK].
The map screen is displayed.
Starting the voice operation
% Press the button when the map
screen or the AV operation screen is dis-
played.
The voice operation screen appears.
1
2
3
4
En
182
Chapter
33
Operating your navigation system with voice