Filter
Top Products
20
6 Disconnect GoGear Vibe from the
computer.
GoGear Vibe restarts after the »
rmware is updated and is ready for
use again.
EN
13 Update GoGear
Vibe
GoGear Vibe is controlled by an internal
program called rmware. Newer versions of
the rmware may have been released after you
have purchased GoGear Vibe.
The software program called Philips Device
Manager can use your computer to check for
rmware updates that are available on the
Internet.
Install Philips Device Manager on your
computer from GoGear Vibe or download the
latest version from www.philips.com/support.
Note
Your music les are not affected by a rmware •
update.
Manually verify / update
rmware
1
Ensure that your computer is connected
to the Internet.
2 Connect GoGear Vibe to the computer
(see section Connect and charge for
instructions).
3 On your computer, click Start >
Programs > Philips Digital Audio Player
> Vibe Device Manager to launch Philips
Device Manager.
4 Click Update
» Philips GoGear Vibe Device Manager
checks for updates and installs new
rmware from the Internet, if available.
5 When the display shows Update
completed, click OK.