Filter
Top Products
CLOCK/TIMER
29
You can select different timer functions which will be
activated at a chosen time. Make sure the clock is set before
using one of these features.
Alarm timer setting
The set can be used as an alarm clock, whereby the tuner,
CD recorder or CD changer starts playback automatically at a
preset time.
1 Press as often as necessary y STANDBY ON on the set to
switch the set to standby.
2 Press CLOCK/TIMER on the set.
3 Rotate JOG CONTROL to select the alarm timer.
yAlarm is displayed, ALARM is blinking.
4 Press YES to confirm the selection.
yThe hour digit is blinking.
5 Rotate JOG CONTROL to set the hour.
6 Use ! SEARCH or ⁄ SEARCH on the set to move from
hour to minutes.
7 Rotate JOG CONTROL to set the minutes.
8 Press YES to confirm the time settings.
9 Rotate JOG CONTROL to select the source you want to be
woken up with.
10 Press YES on the set to confirm the source selection.
• To stop the alarm press y STANDBY ON on the set.
Record timer setting
The set can do recordings automatically from an external
source or from a preset radio station at a preset time.
1 Follow steps 1 and 2 of “Alarm timer setting”.
2 Rotate JOG CONTROL to select the record timer.
yRec Timer is displayed, REC is shown and X starts
blinking.
3 Press YES on the set to confirm the selection.
yThe hour digit for start of recording blinks.
4 Rotate JOG CONTROL to set the hour of start of recording.
5 Use ! SEARCH or ⁄ SEARCH on the set to move from
hour to minutes of start of recording.
6 Rotate JOG CONTROL to set the minutes of start of
recording.
7 Continue this procedure by using ! SEARCH or
⁄ SEARCH to move on to hour and minutes of end of
recording and to the day of the week. After each move,
always rotate JOG CONTROL to do the settings.
8 Press YES to confirm the settings.
9 Rotate JOG CONTROL to select the source you want to
record from.
If you have chosen the tuner as source:
Rotate JOG CONTROL again to select a preset radio station
and confirm this selected station by pressing YES.
10 Press YES on the set to confirm the source selection.
• To stop the recording press STOP & on the set.
• Press TIMER ON/OFF on the remote control repeatedly to
switch the alarm and/or record timer on or off:
y ALARM is shown and Alarm ON is displayed when the
alarm timer is switched on.
y REC is shown and REC Timer ON is displayed when
the record timer is switched on.
y ALARM and REC are shown, REC+Alarm ON is
displayed when the alarm and record timer are
switched on.
y ALARM and REC go off, REC+AlarmOFF is displayed
when the alarm and record timer are switched off.
You can set a certain period of time before the set switches
off.
1 Press SLEEP on the remote control until the desired sleeper
time is displayed.
ySLEEP is shown and Sleep 60 min, 45 min,
30 min, 15 min is displayed or Sleep OFF is
displayed.
2 As soon as the desired time is displayed, do not press
SLEEP again.
yAfter the chosen time has elapsed, the set switches to
standby.
• To deactivate the sleep timer press SLEEP on the remote
control until Sleep OFF is displayed.
Sleep timer
Switching the alarm and record timer on/off
Record timer
Alarm timer
English