Philips AD7000W MP3 Docking Station User Manual


 
7EN
3 Prepare
Always follow the instructions in
this chapter in sequence.
Connect power
Caution
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
Before you connect the AC adaptor, make sure that you
have completed all the other connections.
Connect the AC power cord to
the DC IN socket on the back of the
unit.
the wall power socket.
Turn AD7000W on
1 Press on the back to turn the unit on.
2 Wait for successful boot-up of the unit.
» The boot-up takes about 35 seconds.
» During boot-up, the WI-FI SETUP
indicator on the back of the unit blinks
green quickly.
» After boot-up, if no Wi-Fi connection
has been set up for AD7000W, the
WI-FI SETUP indicator starts to blink
green slowly.
To switch the unit to Eco standby mode,
press .
To switch the unit on from Eco standby
mode, press again.