Filter
Top Products
C637M-B (10/03) 9
MOUNTING
The storage unit can be placed on a flat surface, such as a shelf, or it can be installed in a 19-inch (48.26 cm) wide equipment rack.
NOTE: Allow one rack unit (1.75 inches or 4.5 cm) of space above the storage unit for air circulation.
To install the storage unit in an equipment rack:
1. Attach the two brackets to each side of the storage unit.
2. Attach the support rails to the equipment rack.
3. Place the storage unit onto the support rails. It should easily slide in and out of the rack.
4. Fasten the rack ears to the equipment rack.
RACK
VIDEO
STORAGE
UNIT
(6) SCREWS, M4 X .250-INCH
PAN HEAD (3 EACH SIDE)
(4) SCREWS,
10-32 X .375-INCH
FLAT HEAD
(8) SCREWS,
10-32 X .375-INCH,
FLAT HEAD
BRACKET
(SIDE VIEW
)
SLOTTED HOLES
TOWARDS FRONT
OF UNIT
TAPERED ENDS
TOWARDS REAR
OF UNIT
(4) SCREWS,
10-32 X .750-INCH
PHILLIPS, PAN HEAD
WITH WASHERS
SUPPORT RAILS
(6) SCREWS,
8-32 X .375-INCH,
PAN HEAD WITH
WASHERS
Figure 3. Rack Mount Installation